DNJ
DNJ 1978 Plymouth Fury 5.9L Intake Valve
DNJ 1978 Plymouth Fury 5.9L Intake Valve
Part number: IV1153_142
Regular price
$10.99 USD
Regular price
Sale price
$10.99 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
DNJ 1978 Plymouth Fury 5.9L Intake Valve, listed for 1978 Plymouth Fury with the 5.9L engine. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.
Quick facts
- Brand: DNJ
- Part type: Valve
- Listed for: 1978 Plymouth Fury
- Engine: 5.9L
- Engine code: 16V OHV
- Part number: IV1153_142
Listed fitment
- [1976-1992] CHRY [Nitride Coated; 2 Groove; 45.2mm Head Dia.; 9.5mm Stem Dia.; 126.5mm O.A.L.] / V6, V8 / 3.9L, 5.2L, 5.9L / 239, 318, 360 OHV 12V, 16V
Good to know
- Notes: Nitride Coated; 2 Groove; 45.2mm Head Dia.; 9.5mm Stem Dia.; 126.5mm O.A.L.; Intake, [ 2 Grooves & 1.780" Head ]
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Have the valve seats cut or lapped so the new valves seal fully.
About this valve
Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.
Fitment notes
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Intake Valves · All Intake Valves · Engine
Questions about engine valves
Will this fit my car?
Check the title and details above for the vehicles and part number it is listed for. If you are not sure, contact us with your year, make, model, engine and trim and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.
Ask a question
More parts for this car