DNJ
DNJ 1976 GMC G25 5.7L Valve Lifter
DNJ 1976 GMC G25 5.7L Valve Lifter
Part number: LIF3101_1410
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: GMC G25 5.7LFitment notes & questions
1976 GMC G25 5.7L Valve Lifter by DNJ for 1976 GMC G25 with the 5.7L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter.
Quick facts
- Brand: DNJ
- Part type: Lifter set
- Listed for: 1976 GMC G25
- Engine: 5.7L
- Engine code: 16V OHV
- Part number: LIF3101_1410
Listed fitment
- [1962-1996] GM / L6, V6, V8 / 3.8L, 4.1L, 4.6L, 4.8L, 5.0L, 5.3L, 5.7L, 6.6L, 7.4L / 229, 250, 283, 292, 305, 307, 327, 350, 400, 454 OHV 12V, 16V [(CHEVROLET)]
Good to know
- Notes: Hydraulic
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

DNJ lifters for the GMC G25 5.7L: what to know
A ticking noise from the top of the engine is often a worn or collapsed lifter.
Fitment notes
- Listed for: GMC G25 5.7L.
- Engine: match the engine size and code to your vehicle; the same model often came with several engines.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentWhat else to plan for
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Lifters · GMC Parts · All Lifters · Engine
Questions about GMC G25 5.7L lifters
Will this fit my GMC G25 5.7L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.