DNJ
DNJ 1975 GMC C35 5.7L Valve Lifter
DNJ 1975 GMC C35 5.7L Valve Lifter
Part number: LIF3101_1257
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: GMC C35 5.7LFitment notes & questions
1975 GMC C35 5.7L Valve Lifter from DNJ, listed for 1975 GMC C35 with the 5.7L engine. Lifters wear together with the cam lobes, which is why they are usually replaced with the cam.
Quick facts
- Brand: DNJ
- Part type: Lifter set
- Listed for: 1975 GMC C35
- Engine: 5.7L
- Engine code: 16V OHV
- Part number: LIF3101_1257
Listed fitment
- [1962-1996] GM / L6, V6, V8 / 3.8L, 4.1L, 4.6L, 4.8L, 5.0L, 5.3L, 5.7L, 6.6L, 7.4L / 229, 250, 283, 292, 305, 307, 327, 350, 400, 454 OHV 12V, 16V [(CHEVROLET)]
Good to know
- Notes: Hydraulic
- Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Tip: Soak hydraulic lifters in oil before installation and set preload as your engine requires.

Before you order: GMC C35 5.7L lifter set fitment
Lifters ride on the camshaft and pass its motion to the pushrods or valves.
Fitment notes
- Listed for: GMC C35 5.7L.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Lifters · GMC Parts · All Lifters · Engine
Questions about GMC C35 5.7L lifters
Will this fit my GMC C35 5.7L?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.