DNJ
DNJ 1975 Ford E-100 Econoline Club Wagon 5.8L Intake Valve
DNJ 1975 Ford E-100 Econoline Club Wagon 5.8L Intake Valve
Part number: IV4113_3
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford E-100 EconolineFitment notes & questions
Club Wagon Intake Valve from DNJ, listed for the 1975 Ford E-100 Econoline with the 5.8L engine. Highlights include nitride Coated and 1 Groove. Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job. Part number: IV4113_3.
Key features
- Nitride Coated
- 1 Groove
- 3mm Head Dia
- 7mm Stem Dia
- 128.8mm O.A.L
Specifications
- Brand: DNJ
- Part type: Valve
- Part number: IV4113_3
- Position: Intake
- Engine: 5.8L
- Engine code: VIN H HO 16V OHV
Fitment for the 1975 Ford E-100 Econoline
- Years: 1975–2001
- Vehicles: Ford
- Application: Nitride Coated; 1 Groove; 45.3mm Head Dia.; 8.7mm Stem Dia.; 128.8mm O.A.L.
- Cylinders: V8
- Displacement: 5.0L, 5.8L
- Engine: 302, 351 OHV 16V
- Engine codes: WINDSOR
Check your year, model, engine and trim against this list before you order.
What it does
Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Have the valve seats cut or lapped so the new valves seal fully.
- Valve stem seals: Always new with new valves.
- Head gasket: The head comes off for this job.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this club wagon intake valve?
IV4113_3 (DNJ). Compare it with the number on your old part or in your parts catalog.
Which engine is it for?
It is listed for the 5.8L VIN H HO 16V OHV engine in the 1975 Ford E-100 Econoline. Check the engine code on your vehicle if it was offered with more than one engine.
Which side or position does it fit?
It is listed for the intake position. If you are replacing both sides, check whether you need one of each.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (1975 Ford E-100 Econoline 5.8L).
- Check the position: this part is listed as intake.
- Compare part number IV4113_3 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Before you order: Ford E-100 Econoline valve fitment
Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.
Fitment notes
- Listed for: Ford E-100 Econoline.
- Engine: check the engine size listed against your vehicle's VIN or under-hood label.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Valve stem seals. Always new with new valves.
- Head gasket. The head comes off for this job.
More for your car: Ford Intake Valves · Ford Parts · All Intake Valves · Engine
Questions about Ford E-100 Econoline engine valves
Will this fit my Ford E-100 Econoline?
How do I know a valve is bad?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.