• DNJ 1974 Mazda 808 1.6L Intake Valve
1 1

DNJ

DNJ 1974 Mazda 808 1.6L Intake Valve

DNJ 1974 Mazda 808 1.6L Intake Valve

Part number: IV402_13

$8.99 USD
$8.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Mazda 808 1.6LFitment notes & questions

1974 Mazda 808 1.6L Intake Valve from DNJ, listed for 1974 Mazda 808 with the 1.6L engine. Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1974 Mazda 808
  • Engine: 1.6L
  • Engine code: 8V SOHC
  • Part number: IV402_13

Listed fitment

  • [1970-1984] FORD, MAZDA [Nitride Coated; 1 Groove; 42mm Head Dia.; 8.1mm Stem Dia.; 108.6mm O.A.L.] / L4 / 1.6L, 1.8L, 2.0L / 110 SOHC 8V

Good to know

  • Notes: Nitride Coated; 1 Groove; 42mm Head Dia.; 8.1mm Stem Dia.; 108.6mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

About this valve for the Mazda 808 1.6L

Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Fitment notes

  • Listed for: Mazda 808 1.6L.
  • Engine: the same car can take different parts for each engine option, so check yours.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Parts that usually go with it

More for your car: Mazda Intake Valves · Mazda Parts · All Intake Valves · Engine

Questions about Mazda 808 1.6L engine valves

Will this fit my Mazda 808 1.6L?
It is listed for the Mazda 808 1.6L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Mazda Intake ValvesMazda PartsIntake ValvesAll DNJ