• DNJ 1970 Buick Skylark 4.1L Intake Valve
1 1

DNJ

DNJ 1970 Buick Skylark 4.1L Intake Valve

DNJ 1970 Buick Skylark 4.1L Intake Valve

$10.99 USD
$10.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Buick Skylark 4.1LFitment notes & questions

DNJ 1970 Buick Skylark 4.1L Intake Valve, listed for 1970 Buick Skylark with the 4.1L engine. Valves are usually replaced during a cylinder head rebuild, along with guides, seals and a valve job.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1970 Buick Skylark
  • Engine: 4.1L
  • Engine code: U/K 12V OHV
  • Part number: IV3125B_115

Listed fitment

  • [1963-1995] GM [Nitride Coated; 2 Groove; 43.8mm Head Dia.; 8.7mm Stem Dia.; 124.6mm O.A.L.] / L6, V8 / 4.1L, 4.8L, 5.7L, 6.6L / 250, 292, 350, 400 OHV 12V, 16V [(CHEVROLET)]

Good to know

  • Notes: Nitride Coated; 2 Groove; 43.8mm Head Dia.; 8.7mm Stem Dia.; 124.6mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

Before you order: Buick Skylark 4.1L valve fitment

Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.

Fitment notes

  • Listed for: Buick Skylark 4.1L.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

Plan the whole job

More for your car: Buick Intake Valves · Buick Parts · All Intake Valves · Engine

Questions about Buick Skylark 4.1L engine valves

Will this fit my Buick Skylark 4.1L?
It is listed for the Buick Skylark 4.1L. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car
Buick Intake ValvesBuick PartsIntake ValvesAll DNJ