07-18 Dodge Nitro / Jeep Liberty / Wrangler Rear Sensor - Left/Right
07-18 Dodge Nitro / Jeep Liberty / Wrangler Rear Sensor - Left/Right
Part number: K2-10809-DGE-006-EC
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Dodge NitroFitment notes & questions
Nitro / Liberty / Wrangler Rear Sensor - Left/Right for the 2007–2018 Dodge and Jeep. Highlights include type: Rear oxygen sensor (post-catalyst) and configuration: Single unit, left or right bank. Reading the trouble code first points you to the right sensor.
Key features
- Type: Rear oxygen sensor (post-catalyst)
- Configuration: Single unit, left or right bank
- Condition: New
- Oxygen sensor (1 unit)
- Configuration
Specifications
- Part type: Sensor
- Position: Rear
- Type: Rear oxygen sensor (post-catalyst)
Fitment for the 2007–2018 Dodge and Jeep
Listed for the 2007–2018 Dodge and Jeep, rear position. Check your year, model and trim against the title before you order.
What it does
A failed sensor usually sets a check-engine code and can cause poor running or wrong readings. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.
Installation & tips
- Read the code, check the wiring and connector, and clear codes after the new sensor is in.
- Connector and wiring: Corroded connectors mimic a bad sensor.
- Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2007–2018 Dodge and Jeep).
- Check the position: this part is listed as rear.

About this sensor for the Dodge Nitro
Reading the trouble code first points you to the right sensor.
Fitment notes
- Listed for: Dodge Nitro.
- Model years: 07-18. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Connector and wiring. Corroded connectors mimic a bad sensor.
More for your car: Batteries & electrical · Dodge Parts · Batteries & electrical
Questions about Dodge Nitro sensor
Will this fit my Dodge Nitro?
Will a new sensor clear my check-engine light?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.