06-13 Toyota RAV4 Rear Left ABS Sensor - 4WD Models Only
06-13 Toyota RAV4 Rear Left ABS Sensor - 4WD Models Only
Part number: K2-10794-TOY-006-EC
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Toyota RAV44WDFitment notes & questions
Rear Left ABS Sensor - 4WD Models Only, made to fit the 2006–2013 Toyota RAV4 as listed below. Highlights include ABS wheel speed sensor and rear left axle position. Sensors tell the engine computer what is happening so it can adjust fuel, timing and gauges.
Key features
- 4WD models only - Calibrated specifically for all-wheel-drive RAV4 brake circuits
- ABS wheel speed sensor
- Rear left axle position
- 4WD RAV4 fitment only
- Single unit
- ABS sensor assembly
- The sensor plugs directly into the existing harness at the rear axle. You'll need standard hand tools to unbolt the old unit and install the new one — no rewiring required
Specifications
- Part type: Sensor
- Position: Rear Left
Fitment for the 2006–2013 Toyota RAV4
Listed for the 2006–2013 Toyota RAV4, rear left position. Check your year, model and trim against the title before you order.
What it does
Reading the trouble code first points you to the right sensor. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.
Installation & tips
- Read the code, check the wiring and connector, and clear codes after the new sensor is in.
- Connector and wiring: Corroded connectors mimic a bad sensor.
- Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.
FAQ
Which side or position does it fit?
It is listed for the rear left position. If you are replacing both sides, check whether you need one of each.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2006–2013 Toyota RAV4).
- Check the position: this part is listed as rear left.

Before you order: Toyota RAV4 sensor fitment
Sensors tell the engine computer what is happening so it can adjust fuel, timing and gauges.
Fitment notes
- Listed for: Toyota RAV4.
- Model years: 06-13. Check your car's year falls inside this range.
- Drivetrain: 4WD. AWD and 4WD versions often use different parts from 2WD versions of the same car.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Connector and wiring. Corroded connectors mimic a bad sensor.
More for your car: Batteries & electrical · Toyota Parts · Batteries & electrical
Questions about Toyota RAV4 sensor
Will this fit my Toyota RAV4?
Will a new sensor clear my check-engine light?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.