{"product_id":"yellow-speed-racing-front-4-piston-ultra-big-brake-kit-honda-s2000-2004-2009-ap2","title":"Yellow Speed Racing Front 4 Piston Ultra Big Brake Kit - Honda S2000 2004-2009 (AP2)","description":"\u003cdiv class=\"po-desc\" data-gen=\"v2\"\u003e\n\u003cp\u003eYellow Speed Racing Front 4 Piston Ultra Big Brake Kit for the 2004–2009 Honda S2000 2004-2009. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYSCPF4a (Ø38mm, Ø38mm Pistons; 248mm x 75mm)\u003c\/li\u003e\n\u003cli\u003eYSCPF4b (Ø36mm, Ø36mm Pistons; 248mm x 121mm x 74.5mm)\u003c\/li\u003e\n\u003cli\u003e304 mm x 22mm | (11. 97 \" x 0.87\")\u003c\/li\u003e\n\u003cli\u003e304mm x 26mm | (11.97\" x 1.02\")\u003c\/li\u003e\n\u003cli\u003eForged billet aluminum split design calipers with anti-rust coating, featuring vented aluminum pistons standard for improved heat transfer resistance\u003c\/li\u003e\n\u003cli\u003eTwo-piece drilled, slotted, or drilled \u0026amp; slotted rotors with lightweight aluminum center bells. Rigid steel center bells are equipped for the rear rotors integrated with inner drums\u003c\/li\u003e\n\u003cli\u003eHigh Performance OEM+, Street, Sport or Competition Brake Pads\u003c\/li\u003e\n\u003cli\u003eCNC machined steel caliper mounting brackets for bolt-on caliper installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Yellow Speed Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Brake part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Size:\u003c\/strong\u003e 304mm x 22mm, 304mm x 26mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Model:\u003c\/strong\u003e YSCPF4b, YSCPF4a\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment for the 2004–2009 Honda S2000 2004-2009\u003c\/h3\u003e\n\u003cp\u003eListed for the 2004–2009 Honda S2000 2004-2009, front position. Check your year, model and trim against the title before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eBrake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.\u003c\/p\u003e\n\u003ch3\u003eInstallation \u0026amp; tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.\u003c\/li\u003e\n\u003cli\u003eBrake fluid: Old fluid absorbs water; flush it when you do a brake job.\u003c\/li\u003e\n\u003cli\u003eHardware: Clips and pins wear with the pads.\u003c\/li\u003e\n\u003cli\u003eThis part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side or position does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is listed for the front position. If you are replacing both sides, check whether you need one of each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install it myself?\u003c\/strong\u003e\u003cbr\u003eMany owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering?\u003c\/strong\u003e\u003cbr\u003eCompare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.\u003c\/p\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm your year, make, model and trim match the fitment listed above (2004–2009 Honda S2000 2004-2009).\u003c\/li\u003e\n\u003cli\u003eCheck the position: this part is listed as front.\u003c\/li\u003e\n\u003cli\u003ePlan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Yellow Speed Racing","offers":[{"title":"304mm x 22mm \/ YSCPF4b","offer_id":67816451703098,"sku":"YS02-HD-02I-021","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"304mm x 26mm \/ YSCPF4a","offer_id":67816451735866,"sku":"YS02-HD-02D-021","price":1840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1025\/8245\/2538\/files\/YSR_New_Logo_Kit_5257fa80-a4e5-4ad4-8025-989ea0464571.jpg?v=1793145708","url":"https:\/\/partotter.com\/products\/yellow-speed-racing-front-4-piston-ultra-big-brake-kit-honda-s2000-2004-2009-ap2","provider":"PartOtter","version":"1.0","type":"link"}